Although not shown in photos of the finished product, it is a step up from Hasegawa's previous 1/32 scale aircraft models. Unlike previous products that simply assemble large parts by inserting them from both sides, this product has a frame similar to an H-beam inside, so the fuselage and main wing are firmly fixed. You can think of it as something similar to Hasegawa's 1/48 F-22 Raptor. Other than that, it's nothing special like Tamiya's 1/32 scale aircraft models, but it's faithful to the basics. Kasei engine and landing gear compartments are well presented and details of the fuselage and wing surfaces are well presented. Assembly is also said to be satisfactory. The downside is that unlike other products in the same series, the Flaps are not split and, like other Hasegawa products, the decals are not packaged and there are too many sprues in one plastic pack. When storing this product for a long time, you should pay attention to the above points.
Overall, I would recommend it to anyone who is enamored with the Raiden's chubby fuselage, as well as those who simply want to build a 1/32 scale aircraft. This is because the quality of the product is satisfactory, the assembly is not difficult, and the price is low. Except for the engine and cockpit, the interior is not reproduced, so it will be possible to build it without any burden.
この商品を買った人はこんな商品も買っています
ページ 1 以下のうち 1 最初から観るページ 1 以下のうち 1
メーカーによる説明
ハセガワ 1/32 日本海軍 三菱 J2M3 局地戦闘機 雷電 21型 プラモデル ST32
1941年創業のプラモデルメーカーのハセガワより1/32局地戦闘機。
雷電は上昇能力や速度性能を重視した設計で製造。大直径エンジンを搭載したパワフルなスタイルを用い、飛来する敵爆撃機に対する迎撃機(インターセプター)として開発された局地戦闘機。最新の資料をもとにフォルムとディテールを追求、完全新金型でキット化した1/32のビッグスケールで精密感あふれるプラモデルとなっている。
ハセガワ 1/32 日本海軍 三菱 J2M3 局地戦闘機 雷電 21型 プラモデル ST32
|
|
|
|
|---|---|---|
プロペラ部高高度用、中高度用の選択式。 |
胴体、主翼部桁状のサポートパーツを挟み込んで組み上げる設計を採用し正確な組立と強度を実現。エンジンやコクピットの内部は1/32ならではの精密感あふれる彫刻となっている。 |
パイロット部竹一郎氏の原型による着座姿勢のフィギュアが付属しており、頭部は3種、右腕は2種からの選択式。 |
イメージ付きのレビュー
Good product for not only Raiden manias but also beignners
Although not shown in photos of the finished product, it is a step up from Hasegawa's previous 1/32 scale aircraft models. Unlike previous products that simply assemble large parts by inserting them from both sides, this product has a frame similar to an H-beam inside, so the fuselage and main wing are firmly fixed. You can think of it as something similar to Hasegawa's 1/48 F-22 Raptor. Other than that, it's nothing special like Tamiya's 1/32 scale aircraft models, but it's faithful to the basics. Kasei engine and landing gear compartments are well presented and details of the fuselage and wing surfaces are well presented. Assembly is also said to be satisfactory. The downside is that unlike other products in the same series, the Flaps are not split and, like other Hasegawa products, the decals are not packaged and there are too many sprues in one plastic pack. When storing this product for a long time, you should pay attention to the above points.Overall, I would recommend it to anyone who is enamored with the Raiden's chubby fuselage, as well as those who simply want to build a 1/32 scale aircraft. This is because the quality of the product is satisfactory, the assembly is not difficult, and the price is low. Except for the engine and cockpit, the interior is not reproduced, so it will be possible to build it without any burden.
上位レビュー、対象国： 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
2022年2月15日に日本でレビュー済み
Amazonで購入
Although not shown in photos of the finished product, it is a step up from Hasegawa's previous 1/32 scale aircraft models. Unlike previous products that simply assemble large parts by inserting them from both sides, this product has a frame similar to an H-beam inside, so the fuselage and main wing are firmly fixed. You can think of it as something similar to Hasegawa's 1/48 F-22 Raptor. Other than that, it's nothing special like Tamiya's 1/32 scale aircraft models, but it's faithful to the basics. Kasei engine and landing gear compartments are well presented and details of the fuselage and wing surfaces are well presented. Assembly is also said to be satisfactory. The downside is that unlike other products in the same series, the Flaps are not split and, like other Hasegawa products, the decals are not packaged and there are too many sprues in one plastic pack. When storing this product for a long time, you should pay attention to the above points.
Overall, I would recommend it to anyone who is enamored with the Raiden's chubby fuselage, as well as those who simply want to build a 1/32 scale aircraft. This is because the quality of the product is satisfactory, the assembly is not difficult, and the price is low. Except for the engine and cockpit, the interior is not reproduced, so it will be possible to build it without any burden.
Overall, I would recommend it to anyone who is enamored with the Raiden's chubby fuselage, as well as those who simply want to build a 1/32 scale aircraft. This is because the quality of the product is satisfactory, the assembly is not difficult, and the price is low. Except for the engine and cockpit, the interior is not reproduced, so it will be possible to build it without any burden.
このレビューの画像
